6
product at a time until this no longer happens. If the breaker trips
with no components connected, there may be a wiring defect that
requires Furman service.
Indicators
Protection OK Indicator:
Although Furman’s Ground Contamination Free Surge Suppression
rarely requires servicing, nature has a way of occasionally creating
electrical forces that are beyond the capabilities of any transient
voltage surge suppressor device to absorb without some degree
of damage. In the instance that this occurs, the blue “Protection
OK” LED indicator will turn off. If this happens, Furman’s surge
suppression circuit is compromised. The unit must be returned to
Furman Sound, or an authorized Furman Service Center for repair.
Mounting
If the Power Station needs to be mounted to the inside panel of a rack
or hung from a wall, a convenient crossed oval cutout is provided on
the unit’s bottom panel. A standard No. 6 pan head screw can be
used in the same way a picture is hung from a wall. Simply measure
the centers on the bottom of your Power Station. This will be the
distance from the two mounting holes drilled into your wall, rack or
cabinet surface. Once the screw is fastened fl ush with the surface,
back it out approximately ½”. The screw head should push through
the crossed cutout on the bottom surface of the Power Station. Next,
simply allow the Power Station to move down and seat into the end
of its oval cut-out. Adjust the pan head screw if necessary.
