background image

RVC-7W

- 10 -

WARRANTY

Furman Sound, Inc. warrants to the original purchaser of 

this product, the Furman RVC-7W, that the product will be 

free from defects in material and workmanship for a period 

of three years from the date of purchase. The purchaser of 

the product is allowed fi fteen days from the date of pur-

chase to complete warranty registration by mail or on-line 

at the Furman website. If the purchaser fails to complete 

the aforementioned registration, the warranty period will be 

reduced to one year from the date of purchase.

If the product does not conform to this Limited Warranty 

during the warranty period (as herein above specifi ed), 

purchaser shall notify Furman in writing of the claimed 

defects. If the defects are of such type and nature as to 

be covered by this warranty, Furman shall authorize the 

purchaser to return the product to the Furman factory or 

to an authorized Furman repair location. Warranty claims 

should be accompanied by a copy of the original purchase 

invoice showing the purchase date; this is not necessary if 

the Warranty Registration was completed either by mailing 

in the completed warranty card or by registering on-line 

at the Furman website. Shipping charges to the Furman 

factory or to an authorized repair location must be prepaid 

by the purchaser of the product. Furman shall, at its own 

expense, furnish a replacement product or, at Furman’s 

option, repair the defective product. Return shipping charg-

es back to purchaser will be paid by Furman.

CONNECTED EQUIPMENT WARRANTY: Furman 

Sound’s Connected Equipment Warranty covers equip-

ment that is damaged by transient voltage (an “Occur-

rence”) while properly connected through the Furman 

RVC-7W to a properly wired AC power line with a protec-

tive ground in an indoor location. Furman’s Connected 

Equipment Warranty is limited to the amount of the deduct-

ible on the Purchaser’s personal property insurance policy 

up to $500.00. In order to make a claim for this Connected 

Equipment Warranty, the Purchaser must forward a copy 

of his/her personal property insurance claim for the dam-

aged equipment to Furman and complete the Furman 

Connected Equipment Warranty claim form (call Furman at 

(707) 763-1010 to obtain the form). Furman reserves the 

right to review the damaged Furman product, the damaged 

connected equipment, and the site where the damage 

occurred. All cost of shipping damaged equipment to Fur-

man for inspection shall be borne solely by the Purchaser. 

Damaged equipment must remain available for inspec-

tion until the claim is fi nalized. The Connected Equipment 

Warranty is also in effect for a period of three years unless 

the Purchaser does not complete the warranty registration 

within fi fteen days from date of purchase, at which time, 

the Connected Equipment Warranty period is also reduced 

to one year from the date of purchase.

All warranties contained herein are null and void if: the Fur-

man Surge Protector in use during the occurrence is not 

provided to Furman for inspection upon Furman’s request 

at the sole expense of the Purchaser, Furman determines 

that the Furman Surge Protector has been opened, im-

properly installed, altered in any way or tampered with, 

Furman determines that the damage did not result from 

the Occurrence or that no Occurrence in fact took place or 

Furman determines that the connected equipment was not 

used under normal operating conditions or in accordance 

with Manufacturer’s instructions for the connected equip-

ment. All Furman Surge Protectors must be plugged di-

rectly into a properly wired AC power line with a protective 

ground and must not be “daisy-chained” together in serial 

fashion with other power strips, UPS’s, other surge protec-

tors, three-to-two-prong adapters, or extension cords. Any 

such installation voids this warranty. The Furman warranty 

only protects against damage to properly connected equip-

ment where Furman has determined, at its sole discretion, 

that the damage resulted from an Occurrence and does 

not protect against acts of God (other than lightning) such 

as fl ood, earthquake, war, terrorism, vandalism, theft, 

normal-use wear and tear, erosion, depletion, obsoles-

cence, abuse, damage due to low-voltage disturbances 

(i.e. brownouts or sags), non-authorized program, or sys-

tem equipment modifi cation or alteration. Do not use this 

product in anyway with a generator, heater, sump pump, 

water-related device, life support device, medical device, 

automobile, motorcycle, or golf-cart battery charger. To 

be used indoors only and in dry areas. All warranties con-

tained herein are null and void if used in anyway with any 

of the aforementioned devices.

THE FOREGOING IS IN LIEU OF ALL OTHER WAR-

RANTIES, EXPRESS OR IMPLIED, INCLUDING BUT 

NOT LIMITED TO THE IMPLIED WARRANTIES OF 

MERCHANTABILITY AND FITNESS FOR A PARTICULAR 

PURPOSE.  Furman does not warrant against damages 

or defects arising out of improper or abnormal use or han-

dling of the product; against defects or damages arising 

from improper installation, against defects in products or 

components not manufactured by Furman, or against dam-

INTRODUCTION

FEATURES

DESCRIPTION

INSTALLATION

SAFETY

SPECS

Summary of Contents for RVC-7W













Reviews: