25
Advanced Disc, USB Operation
Audio Setup
KEY
It is for selecting your desired basic music
tone (from low to high).
Video Setup
1. BRIGHTNESS
It is for adjusting the brightness of the
video output.
2. CONTRAST
It is for adjusting the contrast of the video
output.
3. HUE
It is for adjusting the hue of the video
output.
4. SATURATION
It is for adjusting the saturation of the
video output.
5. SHARPNESS
It is for adjusting the sharpness of the
video output.
Speaker Setup
DOWNMIX
It is for selecting your desired sound
effect when there is no center speaker
and subwoofer. There are 3 modes: LT/RT,
STEREO, VSS.
LT/RT: When playing a disc with PRO
LOGIC Dolby stereo effect, choose the
item, so it will output audio signal with
vivid theatre effect.
STEREO: If you choose the item, when
outputting audio signal with 5.1 channels,
it will output the left and right channels of
signal; when outputting audio signal with
2 channels, it will output the common 2
channels of stereo signal.
VSS: If you choose the item, when playing
a disc recorded with 5.1 channels, the
main channel speakers can output audio
signal with VSS effect.
Digital setup
1. DYNAMIC RANGE
After selecting the compression mode of
LINE OUT, set the item, so you can adjust
the linear compression ratio. If you set it
to be FULL, the Peak-to-Peak value of the
English
CCD-0005528 | REV DATE: 11.29.22
