7
Installation
English
Fig. 2
2. Open the refrigerator door. Locate the
bottom trim kit on the refrigerator
with screws (x3). (Fig. 3)
Fig. 3
3. Put the whole refrigerator into the
enclosure. (Fig. 4)
Fig. 4
4. Fix the refrigerator on the enclosure
with the self-tapping screws (x2 each
on the top/bottom). (Fig. 5 and Fig. 6)
Fig. 5
Fig. 6
5. Remove the protective film from the
trim strip cover. Install the shorter
trim strip on the top and the longer
one at the bottom of the refrigerator.
(Fig. 7 and Fig 8)
Short
er
(594mm)
Longer
(650mm)
Fig. 7
Screw: M5x10
Screw: ST4.8x25
Screw: ST4.8x25
Screw: ST4.8x25
CCD-0005596 REV: 10.12.2022
Summary of Contents for FCR10DCBTA-BL
Page 47: ...46 REV 10 12 2022 CCD 0005596...
