5
Specification
Front View
Side View
Top View
D
A
E
G
H
F
A
B
C
C
Front View
Side View
Top View
D
A
E
G
H
F
A
B
C
C
Dimension
A
32”
836mm
E
12½”
319mm
B
25”
636mm
F
13½”
343mm
C
70”
1780mm
G
40”
1020mm
D
59”
1498mm
H
217/8”
554mm
NOTE:
●
The product must be correctly installed, located and
operated in accordance with the instructions contained in
the User Manual provided.
●
Parameters provided in table are design parameters.
Because of the various reasons, there will be a slight
deviation between actual dimension and design
parameter. The data listed are only for reference.
Site Preparation
Select Location
●
Your new refrigerator must stand on a flat surface which
should support a weight of 529Lbs (240kg). Surface must
be level relative to the coach floor plane.
NOTE:
A slope that is comfortable to live with, and from
normal transportation is acceptable.
●
If the appliance is to be placed onto the carpet, support it
with a wooden board. Do not place the appliance directly
on the carpet, as the heat from the compressor may
cause the carpet to fade.
●
For best and most efficient operation, the refrigerator
should operate within 50°F ~ 109°F (10°C ~ 43°C). If
installing near large heat sources, such as furnaces,
fireplaces, furnaces, etc. Ensure a thermal barrier, such as
wood paneling, isolates the refrigerator space as not to
hinder performance of the appliance.
Refrigerator Cabinet/Enclosure Preparation
●
Position the appliance away from sources of heat such as
stoves, radiators, direct sunlight, direct weather such as
rain, etc.
W
Min. 337/8’’ (861mm)
H
Min. 71’’ (1805mm)
D
Min. 243/4’’ (630mm)
H
D
W
Min. cabinet dimension
NOTE:
Dimensions
include the required
clearance for venting.
Electrical Connection
WARNING
Any electrical work required to install this appliance should
be carried out by a qualified or competent person.
All Furrion products referenced in this manual is to be
installed in accordance with local and national codes,
including the latest editions of the following standards:
USA:
−
NFPA 1192
−
NFPA 70
−
ANSI/RVIA low Voltage
Canada:
−
C22.1
−
CSA Z240
The refrigerator is powered by nominal DC12V, wire size
(AWG) is important to prevent significant voltage drop.
Directly connect 12V+ to the DC12V power source. Fuse the
wire appropriately within 18” of the DC12V power source for
the wire size/rating used.
