background image

General information

Overview:

Thank you for purchasing a Furrion reversing camera system.

Furrion’s reversing camera system is one of the easiest rear view camera 

systems to install in your trailer, truck or RV. All that is required is a connection

of a single DC power supply to the rear camera from a reversing power 

source.  

The Furrion reversing camera system is using 

digital wireless

 technology 

giving the major benefit of superior signal transmission with low interference 

on a single bandwidth channel.  This means the Furrion camera unit eliminates 

the interferences which other analogue signal systems are subject to, meaning 

the Furrion digital system gives you a clearer picture of what is behind you no 

matter where you are.

This Furrion system with integrated antenna attached to the camera has been 

specifically designed for use on trailers, trucks, 5th wheels, caravans and RV’s.

This system has been designed for extended range applications or security 

monitoring.

Features:

This unit can be used as a reversing camera, tow hitch monitor or security

monitor.

This unit features:

 

Wide angle viewing lens

 

Night vision LED lights

 

Camera mounting bracket to reduce glare

 

Digital wireless signal for clear picture quality

 

Easy installation

 

Adjustable camera angle

 

5

Summary of Contents for FRCBRKT-BL


















Reviews: