6. MAINTENANCE, TROUBLESHOOTING
6-12
6.8
Sentence Monitor
You can check which sentences input to the radar.
6.9
Fallback Arrangements
If the top priority sensor (for example EPFS1) cannot be used, this equipment auto-
matically uses the second priority sensor (for example, EPFS2) when multiple sensors
(EPFS1 and EPFS2 for example) are installed. When there is no fallback sensor avail-
able, each function is limited as follows:
1) Open the [MAIN MENU].
2) Select [9 INITIAL SETTINGS].
3) Select [7 TESTS].
4) Select [3 SENTENCE MONITOR].
5) Select the item you want to check.
All sentences input to the radar for the selected item ap-
pear on the screen.
Press the
F3
key to save the sentence information to
the SD Card.
Press the
F4
key to save a screenshot to the SC Card.
Note:
If a SD Card is not connected to the Processor
Unit, you cannot save sentence information or screenshots.
6) Press the
F1
key to close the sentence information.
7) Repeat steps 5 and 6 to view other sentence information as required.
8) Close the menu.
Sensor
Function limitations
Heading
sensor
• The [HDG] indication reads "***.*°"
• The orientation mode is automatically set to [HEAD-UP].
• TT, AIS, radar map and echo averaging are disabled.
Speed
sensor
When [LOG(WT)] is selected:
• The sensor used is automatically switched in the following priority order: EPFS(BT)
o
LOG(BT).
• The SPD indication reads "***.* kn" when both EPFS(BT) and LOG(BT) cannot be
used.
When [LOG(BT)] is selected:
• The sensor used is automatically switched in the following priority order: EPFS(BT)
o
LOG(WT).
• The SPD indication reads "***.* kn" when both EPFS(BT) and LOG(WT) cannot be
used.
When [EPFS(BT)] is selected:
• The sensor used is automatically switched in the following priority order: LOG(BT)
o
LOG(WT).
• The SPD indication reads "***.* kn" when both LOG(BT) and LOG(WT) cannot be
used.
COG/SOG
sensor
• When the EPFS sensor cannot be used, the values of COG and SOG are calculat-
ed from HDG and LOG(BT).
• Additionally when the heading sensor cannot be used, the values of SOG is calcu-
lated from LOG(BT). The COG indication reads "***.*°".
Position
sensor
• The POSN indication reads all asterisks.
• AIS and radar map are disabled.
Summary of Contents for FAR-2218
