manualshive.com logo in svg

Furuno FAR-2218, Operator'S Manual

The Furuno FAR-2218 Operator's Manual is a comprehensive guide that provides detailed instructions for operating and optimizing the performance of the FAR-2218 radar system. Download this indispensable manual for free from our website, ensuring you have all the necessary information to make the most of this advanced marine radar technology.

Share
Download
background image

IN-1

INDEX

A

Acquisition zone ...................................... 3-22

acknowledge AZ alert............................ 3-24
activate AZ1 .......................................... 3-23
AZ shape............................................... 3-25
AZ stabilization...................................... 3-25
AZ2 polygon .......................................... 3-23
change AZ reference............................. 3-25
sleep a zone.......................................... 3-24

AIS

CPA/TCPA alarm .................................. 4-18
pop-up info ............................................ 4-10

AIS lost target

filtering................................................... 4-16

AIS operation

activate target.......................................... 4-6
auto activate function enable/disable ...... 4-7
controls.................................................... 4-2
CPA/TCPA ............................................ 4-18
create and save messages ................... 4-22
display AIS alerts .................................. 4-25
display filter ............................................. 4-4
how to set up for a voyage ...................... 4-9
how to sleep all targets ........................... 4-8
how to sleep individual targets ................ 4-8
how to sleep targets ................................ 4-8
manually activate target .......................... 4-6
messages.............................................. 4-22
own ship data ........................................ 4-21
ROT setting ........................................... 4-17
symbols and meanings ........................... 4-4
system messages ................................. 4-25
target data ............................................. 4-10
transmit messages ................................ 4-23
TT/AIS association ................................ 4-19
view messages...................................... 4-24

AIS opertation

lost target .............................................. 4-16
past position display.............................. 4-15
past position orientation ........................ 4-15
past position stabilization ...................... 4-16
symbol attributes ................................... 4-13
symbol brilliance.................................... 4-13
symbol color .......................................... 4-13

AIS target data

how to display AIS target data .............. 4-11
how to remove AIS target data.............. 4-12

Alerts

alert icons and meanings ...................... 1-99
alert list.................................................. 1-98

Automatic Clutter Elimination 
(ACE) function......................................... 1-38
AZ............................................................ 3-22

B

Background colors ......................... 1-83

, 

1-85

Bearing measurement............................. 1-53

EBL key................................................. 1-54
methods ................................................ 1-54
on-screen box ....................................... 1-54
true/relative ........................................... 1-54

C

Chart

align....................................................... 5-26
chart settings......................................... 5-27
icons...................................................... 5-26
settings menu........................................ 5-27
show/hide .............................................. 5-25
type selection ........................................ 5-27

Chart functions ........................................ 5-25
Chart settings .......................................... 5-27
Color palettes ................................. 1-83

, 

1-85

CPA/TCPA .............................................. 3-21

acknowledge alarm ............................... 3-21
set ranges .................................... 3-21

, 

4-18

Cursor

diamond ................................................ 1-76
net ......................................................... 1-76

Customized echo

editing.................................................... 1-44
restoring to factory default settings ....... 1-46
restoring to saved settings .................... 1-45

D

Diamond cursor....................................... 1-76
Display mode ........................................ 1-101
DRIFT...................................................... 3-20
Dual Radar ............................................ 1-106

enable/disable ..................................... 1-107
operational considerations .................. 1-108

E

EBL collision assessment

assess risk............................................. 1-55
set reference point ................................ 1-56

F

False echoes

multiple echoes ....................................... 2-3
shadow sectors ....................................... 2-5
sidelobe echoes ...................................... 2-4
virtual images .......................................... 2-4

H

Heading line

how to hide the heading line ................. 1-79

I

Interswitch

antenna information .............................. 1-89

Summary of Contents for FAR-2218







































































































































































































































































































Reviews:

No comments

Related manuals for FAR-2218

Furuno 1932 MARK-2 Specification Sheet preview
1932 MARK-2
Brand: Furuno Pages: 2
Hosiden Besson Banshee Excel Lite Xenon Product Sheet preview
Banshee Excel Lite Xenon
Brand: Hosiden Besson Pages: 2
Whisper Tech WhisperGen 3000 Series Installation And Commissioning Manual preview
WhisperGen 3000 Series
Brand: Whisper Tech Pages: 53
Garmin GTX 320 Installation Manual preview
GTX 320
Brand: Garmin Pages: 43
Kongsberg SR 562 Maintenance Manual preview
SR 562
Brand: Kongsberg Pages: 41
Quark-Elec QK-A042T Manual preview
QK-A042T
Brand: Quark-Elec Pages: 14
Sailor Sailor 6300 MF/HF DSC User Manual preview
Sailor 6300 MF/HF DSC
Brand: Sailor Pages: 86
SevenStar Electronics S.701 SART User Manual preview
S.701 SART
Brand: SevenStar Electronics Pages: 2
Dual MGH17BT Installation & Owner'S Manual preview
MGH17BT
Brand: Dual Pages: 31
Observator Instruments OMC-131 Installation And Technical Manual preview
OMC-131
Brand: Observator Instruments Pages: 28
Garmin CR 1522 Owner'S Manual preview
CR 1522
Brand: Garmin Pages: 74
DAVIS Vantage Vue PRO+ Installation Manual preview
Vantage Vue PRO+
Brand: DAVIS Pages: 32
B&G RAM T2 User Manual preview
RAM T2
Brand: B&G Pages: 20
TradeQuip 2010T Owner'S Manual preview
2010T
Brand: TradeQuip Pages: 14
SeaDoo Bombardier GTX 4-TEC Setup preview
Bombardier GTX 4-TEC
Brand: SeaDoo Pages: 15
Spinlock DECKVEST 6D Manual preview
DECKVEST 6D
Brand: Spinlock Pages: 60
RVMedia 041849 Manual preview
041849
Brand: RVMedia Pages: 3
PME MARE CLIK EASY User Manual preview
CLIK EASY
Brand: PME MARE Pages: 8

Brands by name

Popular brands

Load more brands