8. OTHERS MENU
8-3
8.3.2
DISPLAY SETTING menu description
DISPLAY MODE:
Selects the display modes to use. For further details see
“4.3.1 Enabling an echo sounder mode” on page 4-6. The default modes are
horizontal, vertical 1, vertical 1 + vertical 2, and history.
MODE SELECTION:
Determines how display modes are chosen; cyclical
pressing of [MODE] key or pull-down menu. The default setting is MODE KEY.
PRESENTATION MODE:
Chooses presentation mode. Head-up, north-up,
course-up and true motion (requires ship’s speed and heading data) are
available, and the default setting is head-up.
TM DISPLAY RANGE:
Selects how many times to expand the display range in
the true motion mode. 1.3R (R = Range) and 1.6R are available and the default
setting is 1.6R.
BEARING REF:
Selects how to reference bearing for the vertical bearing marker.
The choices are ship’s heading (default) and North.
H-SLICE WIDTH:
Chooses width of the history marker in the history display. The
choices are 1, 2, 4 and 8, 16 (default setting) and 32. The higher the number the
greater the width.
H-SLICE PICT ADVC:
Determines how to advance the history display, by KP
SYNC (default setting) or ship’s speed.
NET COURSE MARK:
Inscribes/deletes the net course mark. For further details
see “2.19 Net Course Mark” on page 2-31.
MANUAL DEGAUSS:
In the default setting the screen is automatically
degaussed by the internal sensor when it detects stray magnetic fields on the
screen. If you want to degauss the screen manually select MANUAL DEGAUSS
and press the [MENU] key. Execute degaussing in intervals; consecutive
degaussing may result in color distortion.
AUTO DEGAUSS:
Selects how to degauss the screen automatically.
OFF:
Turns automatic degaussing off.
TIMER:
Degausses at regular intervals.
GYRO:
Using heading data from a heading sensor, degaussing occurs
when heading change exceeds a certain value.
INT SENSOR: Degaussing occurs when the internal sensor in the display unit
detects heading change which exceeds a certain value. This
option is only operative on the FURUNO monitor unit
FSV-2400.
DIMMER:
Adjusts backlighting of the control panel. The setting range is 1-10
and the default setting is 10 (maximum).
KEY BEEP VOLUME:
Sets the volume of the beep which sounds for key
operation. The setting range is 0-7 and the default setting is 5. 0 turns off the key
beep.
Summary of Contents for FSV-24
