9. OTHERS MENU
9-14
DEPTH DISPLAY:
Selects which sonde depth data to show. Select this item and
press the [MENU] key to select net sondes. The check mark shows current
selection (Max. 3).
QUIT
CANCEL
=
S1
=
S2
=
S3
S4
S5
S6
S7
S8
S9
S10
DEPTH DISPLAY menu
NET SHOOT SETTING menu
Sets up net shoot parameters.
INITIAL SETTING
OTHERS
MENU
QUIT
QUIT
NET DIAMETER
: 500 m
TILT INTERLOCK
: ON
NET PLOT CORR-LYR1
: 50%
NET PLOT CORR-LYR2
: 50%
NET PLOT CORR-LYR3
: 50%
QUIT
NET SHOOT SETTING
QUIT
NET SHOOT SETTING menu
NET DIAMETER:
Sets net diameter in increments of 10 meters. Setting range is
200 m to 1000 m.
TILT INTERLOCK:
Turns on/off interlocking of diameter of net course mark with
tilt angle.
NET PLOT CORR-LYR-1, -2, -3:
The movement of the net during net shooting is
plotted using water current speed and direction fed from a current indicator. The
current indicator feeds that data for three depths (layers), thus net movement will
be different at each layer. Determine degree of difference among layers
considering net, sea conditions, etc. If 50% is set, for example, the net
movement plot mark moves at speed of 50% of water current speed.
Summary of Contents for FSV-84
