11. MAINTENANCE, TROUBLESHOOTING
11-9
Interpreting the board test results
•
Board name and its revision no.
are shown in white. If a board is not
inserted or inserted improperly “F” is shown as program number. When a
revision no. is improper a hexadecimal from 0-E appears. When an error is
found, revision no. and board name appear in red.
•
Program no
. is shown in white, or red when software finds revision no. error.
•
DIP switch setting
on each board is shown.
•
Memory read/write test results
are shown as OK (white) or NG (red).
•
Test data check results
are shown as OK (white) or NG (red).
•
TX +B voltage
is measured and displayed.
•
Motion sensor test results
show OK (white) or NG (red) as overall results
and pitch and roll angles.
•
KEY 2-0
will be displayed only when two control units are installed.
Summary of Contents for FSV-84
