9. OTHER FUNCTIONS
9-5
3. Select [2 GPS Smoothing].
4. Select [1 Position], [2 Speed] or [3 Speed Av-
erage].
5. Enter the time for smoothing with the numeric
keys.
6. Move the cursor to [Enter] then press the
NU/
CU ENT
key.
7. Press the
MENU/ESC
key to close the main menu.
9.3.3
How to set the positioning condition
Satellite elevation
You can set the minimum elevation of satellites to use to fix position.
1. Press the
MENU/ESC
key to open the main menu.
2. Select [8 System Setting] then [5 GNSS].
3. Select [3 Condition].
4. Select [1 Elevation Mask].
5. Enter the elevation with the numeric keys.
6. Move the cursor to [Enter] then press the
NU/
CU ENT
key.
7. Press the
MENU/ESC
key to close the main
menu.
Disable satellite
Every GPS satellite is broadcasting abnormal satellite number(s) in its Almanac,
which contains general orbital data about all GPS satellites. Using this information, the
GPS receiver automatically eliminates any malfunctioning satellite from the GPS sat-
ellite schedule. However, the Almanac sometimes may not contain this information.
You can disable an inoperative satellite manually. Enter satellite numbers (up to three
satellites) in three digits.
1. Press the
MENU/ESC
key to open the main menu.
2. Select [8 System Setting] then [5 GNSS].
3. Select [3 Condition].
