2. WIRING, SETTINGS
8
Connect the GPS Receiver at the last node in the network. Insert the contact pin (supplied) into
the #5 socket of the GPS Receiver connector to activate the termination resistor.
2.1.3
Routing and Connecting the Cable Assembly
Route the cable assembly to the CAN bus device. Coil any excess cable and secure it with a cable
tie to prevent damage. Connect the cable assembly to the CAN bus device.
Contact pin inserted
in #5 socket
Tab
Summary of Contents for GP-330B
