4. WAYPOINTS, NAV LINES
20
4.4 Deleting
Waypoints
Waypoints can be deleted individually or collectively.
4.4.1 Deleting
individual
waypoints
1. Press the [NAV MENU], [4] and [3] keys to display the waypoint list.
2. Press the [0] key to display the page which contains the waypoint you want to
delete.
3. Press the [9] key and enter waypoint number in two digits.
4. Press the [ENTER] key.
5. Press any menu key to close the menu.
4.4.2 Deleting
all
waypoints
1. Press the [NAV MENU] and [9] keys to display the PLOTTER ERASE menu.
2. Press the [5] key to shown WPT ALL and then press the [ENTER] key.
3. Press the [NAV MENU] key to close the menu.
Note:
Waypoints currently displayed can be deleted collectively but not
individually. Waypoints used in a navigation line cannot be deleted
collectively or individually unless the navigation line is deleted.
4.5 Navigation
Lines
30 navigation lines may be entered, and each line may have up to 30 waypoints.
4.5.1
Entering new navigation line
1. Press the [NAV MENU], [4] and [5] keys.
[ENTER NAV LINE]
1 [ENTER WPT, NAV LINE]
2 NAV LINE 01
WPT
→ → →
→ → →
→ → →
→ → →
→ → →
→ → →
→ → →
→ → →
→ → →
→ → →
8 ADDING
WPT00
→
00
9 DELETEING
WPT00
ENTER NAV LINE menu
2. Press the [2] key.
3. Enter navigation line number in two digits and then press the [ENTER] key.
4. Enter waypoint number in two digits and then press the [ENTER] key.
5. Repeat step 4 to continue entering waypoint numbers.
6. Press the [ENTER] key followed by the [NAV MENU] key to register
navigation line.
