9. INSTALLATION OF VIDEO PLOTTER KIT
56
1. Follow steps 1 thru 4 in the previous paragraph to open the display unit.
2. Remove M-card lid, case and case cover from M-card assy. The case and
case cover may be discarded.
3. Fasten the M-card assy. with one M4 x 8 screw as below.
Fasten with
M4 x 8 screw.
Fasten with M3 x 8
screws (2 pcs.)
Display unit, inside view
4. Fix the M-card assy. to front panel with two M3 x 8 screws.
5. Set the M-card lid to the hole in the front panel and fix with two M2.6 x 5
screws.
1
7
3
4
5
2
8
6
TX-H
V
GND
1
8
M-card Lid
Pan Head Screw A
M2.6 x 5, 2 pcs.
Pan Head Screw B
M3 x 8, 2 pcs.
Pan Head Screw A
M3 x 8
M-card Assy.
PULL FORWARD
Toothed Washer
M3
Pan Head
Screw B
M4 x 8
Ground Wire
Display pedestal, front view
