3 VIDEO PLOTTER
36
3.7.4
Setting up nav lines
Nav lines can be set up as follows:
1. Press the [NAV MENU] and [3] keys to show the NAV LINE menu.
[NAV LINE]
1
[VIDEO PLOTTER 1]
2
NAV LINE
OFF/ON
3 NAV LINE No.
-> -> ->
->
4
NAV WIDTH
OFF/ON
0.00NM
5
WPT NO.
OFF/ON
6
WPT
WPT**
(**)->@->(**)
(**)->(**)
7
NAV LINE DATA
VIDEO PLOTTER/NAVIGATION
8
ARRIVAL ALARM
OFF/ON
0.00 NM
9
TURNING LINE
OFF/ON/REVISED
Nav line menu (VIDEO PLOTTER selected at item 7)
2. Press the [7] key twice to choose VIDEO PLOTTER from NAV LINE DATA.
3. Press the [ENTER] key.
4. Press the [4] key twice to choose ON from NAV WIDTH.
5. Press the [ENTER] key.
6. Enter the width for the nav line.
7. Press the [ENTER] key. Dashed lines appears at both sides of the nav line. If
unnecessary, choose OFF at step 4.
Note:
The nav lane from own ship position to starting point of the nav line is
not displayed.
8. Press the [5] key twice to choose ON from WPT NO.
9. Press the [ENTER] key.
10. If you want to be alerted when own ship nears a waypoint, press the [8] key
twice to choose ON from ARRIVAL ALARM.
11. Press the [ENTER] key.
12. Enter the arrival alarm range, and then press the [ENTER] key.
Summary of Contents for RP-340
Page 1: ...VIDEO PLOTTER RP 340...
