3. OPERATION
3-11
3.9 System
Setup
3.9.1 Geodetic
data
Your unit is preprogrammed to recognize most of the major chart systems of the
world. Although the WGS-84 system (default setting) is the GPS standard, other
categories of charts in other datum still exist. Match the GPS datum with the
chart system.
1. Press the [MENU] key to open the menu.
2. Choose SYS SETUP and press the [ENT] key.
SYSTEM SETUP
DATUM
:
WGS84
UNITS
: kt
TIME DIFF
: +00:00
TIME DISP
: 24 HOUR
TEST?
DEMO
: OFF
EXCHANGE BATTERY?
SYSTEM SETUP menu
3. Confirm that the cursor is selecting DATUM and press the [ENT] key.
4. Choose WGS84 (GPS standard), WGS72 or OTHER according to the
nautical chart you use and press the [ENT] key.
5. If you chose WGS72 or WGS84, press the [DISP] key to finish. For OTHER,
go to step 6.
6 Press the [ENT] key.
7. Use the Omnipad to enter chart number, referring to the geodetic chart list on
page A-2. Choose location with
◄
or
►
; change value with
▲
or
▼
.
8. Press the [ENT] key.
9. Press the [DISP] key to close the menu.
Summary of Contents for SC-120
