2. OPERATION
2-10
5. Choose SENTENCE and then press the
ENT
key.
DATA OUT1
HDT
VTG
VHW
HDM
GGA
VBW
ROT
GNS
HVE
ATT
GLL
ZDA
VDR
DATA OUT1 menu, sentences
6. Use the
Omnipad
to choose a sentence and then press the
ENT
key.
HDT: True heading (required for radar, AIS, ECDIS, etc.)
HDM: Magnetic heading (HDM is obtained in this equipment by adding the
magnetic variation to HDT.)
ROT: Rate-of-turn
data
ATT: True heading, pitching, rolling (FURUNO’s proprietary sentence)
VDR: Set and drift
VTG: Course over ground and ground speed
GGA: Global positioning system (GPS) fix data
GNS: GNSS
fix
data
GLL: Geographic position, latitude/longitude
VHW: Water speed and heading
VBW: Dual ground/water speed
HVE: GPS antenna up-down motion amplitude (FURUNO proprietary
sentence)
ZDA: Time and date
ON
OFF
7. Use the
Omnipad
to choose OFF or ON as appropriate and then press the
ENT
key. Sentences selected for output are marked with an asterisk.
8. Repeat steps 6 and 7 for other items. All sentences cannot be selected. The
message “SENTENCE OVERLOAD” appears when too many sentences
have been selected. Change settings as appropriate. For further information
see page 2-12.
9. Press the
MENU
key to return to the DATA OUT1 menu.
10. Choose BAUD RATE and then press the
ENT
key.
4800BPS
9600BPS
19200BPS
38400BPS
Baud rate options
