2. OPERATION
2-15
2.9.2
Units of measurement
Distance/speed can be displayed in nautical miles/knots, kilometers/kilometers
per hour, or miles/miles per hour.
1. Press the
MENU
key to open the menu.
2. Choose SYS SETUP and then press the
ENT
key.
3. Choose UNITS.
4. Press the
ENT
key.
5. Choose unit of measurement combination desired; kt, km/h, mi/h.
6. Press the
ENT
key.
7. Press the
DISP
key to close the menu.
2.9.3
Using local time
GPS uses UTC time. If you would rather use local time, enter the time difference
(range: -13:30 to +13:30) between local time and UTC.
1. Press the
MENU
key to open the menu.
2. Choose SYS SETUP and then press the
ENT
key.
3. Choose TIME DIFF and then press the
ENT
key.
4. Press
▲
or
▼
to d or – as appropriate.
5. Enter time difference with the
Omnipad
. Choose digit with
◄
or
►
; change
value with
▲
or
▼
.
6. Press the
ENT
key.
7. Press the
DISP
key to close the menu.
2.9.4 Time
format
Time can be displayed in 12 hour or 24 hour format.
1. Press the
MENU
key to open the menu.
2. Choose SYS SETUP and then press the
ENT
key.
3. Choose TIME DISP and then press the
ENT
key.
4. Choose 12HOUR or 24HOUR as appropriate and then press the
ENT
key.
5. Press the
DISP
key to close the menu.
