Contents
Overview ...........................................................................................
see below
About Your Solar Light ...................................................................................
1
Getting Started ...................................................................................................
1
Important .............................................................................................................
1
Parts and Hardware List ................................................................................
2
Operation .............................................................................................................
2
Installation ......................................................................................................
3-4
Battery Replacement ......................................................................................
5
Trouble Shooting Tips ....................................................................................
6
Care Information ..............................................................................................
6
Warranty Information ....................................................................................
6
Overview
This product is designed to the highest technical specifications and
standards. It will supply years of maintenance free use. Please read
these instructions thoroughly prior to installation, then store in a
safe place for future reference. If at any time you are unclear about
this product, or require further assistance please do not hesitate to
contact our trained professionals operating the customer support
line at 1-877-615-1378 Monday to Friday between the hours 8:30
AM to 5:00 PM Eastern Standard Time or email
sales@fusionproducts.ca
Battery Replacement (Remove Old)
STEP 1:
Turn the nut on the back of the light by hand in a counter clockwise
direction to remove.
STEP 2:
Carefully remove the back cover of the light.
STEP 3:
Locate the ON/OFF switch on the lower
right hand side. Move the switch to the left
(OFF position).
STEP 4:
Carefully remove the old batteries from the
battery compartment.
Battery Replacement (Install New)
STEP 1:
Replace the batteries with
equivalent new solar rechargeable
batteries, ensuring the correct
polarity is observed.
STEP 2:
Move the switch to the right (ON
position).
STEP 3:
Replace back cover.
STEP 4:
Turn the nut in clockwise direction until secure.
Allow the unit to charge for up to 2 days in the <OFF> position. Once fully
charged, move the switch to the right (ON position). The light will
automatically come on when motion is detected within the detection zone
of the sensor once it gets dark.
Caution: Rechargeable batteries contain Nickel-Cadmium or Nickel-
Metal Hydride and must be recycled or disposed of properly. Do not
mix old and new batteries. Do not mix alkaline, standard (carbon-
zinc), or rechargeable batteries. Do not dispose of batteries in fire.
Batteries may explode or leak.
5
