6
INSTALLATION, CONT
’
D: ATTACHING SPLASH GUARD BRACKET TO REAR FRAME SUPPORT RAIL
4. Attaching and Sealing Splash Guard Bracket
To Frame Support Rail At Case Rear
•
The separately shipped splash guard bracket is
designed to prevent entry or leakage of liquid or
moisture to underside of case.
•
After case has been properly positioned and frame
support rails have been shimmed, place a bead of
silicone sealant to underside of splash guard
Frame Support Rail
Silicone Sealant
bracket (that rests on floor). Center back of
bracket flush against frame support rail.
•
Then, attach to frame support rail with
SCC
-
supplied screws.
•
After splash guard bracket has been secured to
frame support rail, apply another bead of silicone
sealant where front of bracket meets floor.
•
Attach rear toe
-
kick to case (with 2 screws).
Splash Guard
Bracket (Shown
Removable Toe
-
Kick
Splash Guard
Bracket
Frame Support
Rails
---
View With Splash Guard Bracket Attached
---
---
View With Splash Guard Bracket Removed
---