Operating Procedures for the Data List
23
(5) Select Display Item Group
Select the group of items to be displayed and touch the
button.
(6) Select Item
Items can be moved back and forth by using either the
button or the button as necessary.
The item order can be changed by the following procedure:
Temporarily return items that were once moved from the
Selected Items to the Selectable Items list, back to the
Selected Items list; change the position of the desired
items; then move the items back to the Selectable Items
list.
--- Touch this button to insert all the items from the
Selectable Item list into the desired positions on the
Selected Item list. Please note that voltage values
cannot be moved.
--- Touch this button to insert the item currently chosen
from the Selectable Item list into the desired
position on the Selected Item list.
--- Touch this button to move the item currently chosen
from the Selected Item list to the very bottom
position on the Selectable Item list.
--- Touch this button to move all the items from the
Selected Item list to the very bottom of the
Selectable Item list.
--- Touch this button to change the order of items on
both the Selectable Item list and the Selected Item
list, in accordance with the specified default setting.
<Note>
In the event that no items are chosen as Selected Items,
then all items will be displayed, except for voltage values.