Recording with the Drive Recorder
37
5-1. Recording with the Drive Recorder
5-1-1. Recording with the Stand-Alone V.C.I..
(1) Select the recording settings using the stand-alone V.C.I.
Use the PC to select the drive recorder settings, such as
the items to be recorded and the triggering method.
Change the main category by selecting the tab located on
the upper side of the screen and selects the system on
which drive recording will be performed.
The procedures used for setting up the Drive Recorder for
the engine system are explained in this section.
Select the
ENGINE
button.
(2) Select Function
Select the
Drive Recorder
button.
(3) Select Drive Recorder Function
Select the
Record
button from the Drive Recorder menu
screen.
(4) Select Triggering Method
Select the triggering method.
Manual Trigger
--- Touch this button for manual triggering.
-> go to section (6).
Diagnosis Code Trigger
--- Touch this button for triggering
upon the occurrence of user-specified DTCs. -> go to
section (5).
(5) Select Diag. Trigger
Select the item to be used as a trigger key and touch the
button.
