Recording with the Drive Recorder
40
(11) Recording Settings List
Recording settings can be confirmed with this function.
Touch the button to confirm the items to be measured
on the Recording Item list screen. -> go to section (12).
--- OK : go to section (13).
(12) Recording Item List
Touch the button to display the settings for data
recording. -> go to section (11).
--- OK : go to section (13).
(13) Confirm Transfer
A message will be displayed requesting confirmation to
transfer settings.
--- OK : go to section (14).
--- Cancel : go to sections (11) / (12).
(14) Transfer Settings
Settings are now being transferred to the V.C.I. Please
wait for a moment until the transfer has completed.
Upon transfer completion, a dialogue box will appear, that
states "Transfer of Settings Completed."
<Note>
If recording operations must be performed immediately
after the transfer of setting has completed, unplug the USB
cable while keeping the V.C.I. switch in the ON position.
If only the settings operations must be performed and if
recording operations are to be performed later, then first
turn the V.C.I. switch off, then unplug the USB cable.