For Your Safety
Please Note
Do not expose the PC or V.C.I. to direct sunlight or high temperatures, or leave the unit in sun-heated
cars. Such action may result in system failure.
Store the PC and V.C.I. in a dry environment at room temperatures.
Moving the PC and V.C.I. to a location with a very different temperature and humidity than that of the
previous location may result in external or internal condensation. Caution is required.
Protect the PC and V.C.I. from exposure to elements such as rain, dirt, dust, food and liquids.
Be careful when handling the PC and V.C.I. Dropping the units may result in damage.
Do not expose either unit to engine oil, gasoline, antifreeze or battery acid. Also, do not clean the PC
or V.C.I. case using solutions such as thinner or benzene. Doing so may result in deterioration of the
case surface.
Prior to connecting the MUT-III main harness between the V.C.I. and vehicle, turn the IG switch to
OFF.
Connecting the V.C.I. harness with the IG switch ON may damage the V.C.I. programming.
Use only the power AC adapter included with the PC (or approved replacement), power cigarette
plug, other probes, main harness and other cables.
Use of unspecified parts may result in damage or malfunction due to excess voltage or insufficient
contact.
The LCD display of this unit turns off when the supplied voltage is less the DC 8V. This is not an error.
The power supplied should be from 8VDC to 32VDC.
Keep all V.C.I. connectors and openings away from dirt and static electricity. Exposure to dirt and
static electricity may result in malfunction and damage.
