Analyzing Recorded Data
55
5-3. Analyzing Recorded Data
5-3-1. Regenerating Recorded Data
(1) Select the
Data Display
button from the Drive Recorder
function menu. To display data without connecting the V.C.I.
to the vehicle, select
Special Function
from the function
selection menu screen, then select
Drive Recorder
.
(2) Regenerated File List
Select the desired data to display from the regenerated file
list, then touch the button to view the text data.
Also, touch the and buttons to view the graph
data.
--- Text View: go to section (3).
--- Graph View 1: go to section (4).
--- Graph View 2: go to section (5).
<Note>
The name of the file currently displayed is composed of DR
(SD) + date + time. The time at which data was
downloaded into the PC is used as a reference. The most
recent data is displayed first.
DR: files saved via the Drive Recorder.
SD: files saved via the Data List.
(Including the Data List saved via the actuator test.)
(3) Text View
The data recorded via the Drive Recorder recording
operation will be displayed as text.
Triggering points are displayed in red font.
--- Graph View 1: go to section (4).
--- Graph View 2: go to section (5).
--- Select Item: go to section (7).
--- Set Data Extraction Condition: go to section 5-3-2.(1).
--- Set Data Searching Condition: go to section 5-3-2.(3).
--- Jump to Triggering Point
--- Save Regenerated File: go to section (6).
--- Set Correlation Chart: go to section 5-3-3.(1).
--- Set Distribution Chart: go to section 5-3-3.(2).
--- Switch displays of individual function button (1/3 view)
--- Switch displays of individual function button (2/3 view)
--- Switch displays of individual function button (3/3 view)
<Note>
The order in which items are displayed can be changed
(refer to section 5-3-4).
