Page 9
| SkyWind Installation Handbook
12. a) Set Up Details
A new inverter must be set
-
up: Navigate to the main menu by pressing the
‚
Home
‘
-
button on the side of
the display. Use the
‚
arrow
‘
-
buttons to navigate to the
‚
Gear
‘
-
symbol on your display and enter the menu
by pushing the
‚
Gear
‘
-
button on the side of the display.
Now use the
‚
arrow
‘
-
buttons to select the
„
Current Curve Adjust
“
box and tick it by pushing the
‚
Gear
‘
-
button. Select
Powercurve A
oder
Powercurve B
according to your sites criteria:
12.a) I) Power Curve A
For sites with an even flow of wind
12. a) II) Power Curve B
For sites with a gusty or partly turbulent flow of wind
Once you have decided for the correct powercurve, use the
‚
arrow down
‘
key to navigate into the first da-
ta field. Activate the data set
-
up by pushing the
‚
Gear
‘
-
button on the side of the display and select the cor-
rect number by again using the
‚
arrow
‘
-
buttons. By pushing the
‚
Gear
‘
-
button again you confirm your ent-
ry. Enter the complete power curve.
After completing the power curve navigate to the
‚
Dumpload
‘
box by using the
‚
arrow
‘
-
buttons and acti-
vate it using the
‚
Gear
‘
button. Select 45V if you decided for power curve A, or select 40V if you decided for
power curve B using the
‚
arrow
‘
-
buttons. Confirm your entry by pushing the
‚
Gear
‘
-
button.
Confirm your entries by pushing the
‚
home
‘
-
button on the side of your display. Save your entries by selec-
ting
‚
YES
‘
and confirming using the
‚
Gear
‘
-
button in the next menu.
Congratulations—your inverter has been set
-
up for operation.
23V
26V
30V
34V
38V
42V
46V
50V
52V
A
023
028
038
047
059
074
093
117
142
x0.1A
23V
26V
30V
34V
38V
42V
46V
50V
52V
B
018
024
034
055
072
094
115
134
155
x0.1A