58
SELECT Mode Functions
スタート機能なし
スタート機能あり
ホイルスピン
フルグリップ
●加速しない
●加速する
点滅
点滅
Start Function
When the throttle trigger is set to full throttle simultaneously with starting when the
track is slippery, the car wheels will spin and the car will not accelerate smoothly.
When the Start function is activated, merely operating the throttle trigger slowly
causes the throttle servo to automatically switch from the set trigger position to a
preset point so that the tires do no loose their grip and the car accelerates smoothly.
Without Start function
Wheels spin
- Car does not accelerate
With Start function
Tires grip the track firmly
- Car accelerates
Start Function Operation
- When the throttle stick is moved to the preset position (throttle position: TG.P), the
throttle servo moves to the preset position.
- When the throttle stick is operated slowly so that the wheels will not spin, the car
automatically accelerates to the set speed.
- This function is effective only for the first throttle trigger operation at starting. This
function has to be activated before every start.
- When the throttle trigger is returned slightly, the Start function is automatically
deactivated and the set returns to normal throttle trigger operation.
Operation by Switch
When the switch is pressed, the throttle servo will move to the preset position without
regard to the throttle trigger position. This is convenient when used to cut the engine
of boats, etc. (PSH switch only)
1. Call the Start function set-up
screen by pressing the
DOWN key five times at the
initial screen.
- 5 times
2. (Trigger position setting)
Call the throttle trigger posi-
tion set-up screen by press-
ing the SELECT key once.
Blink
Blink
DIRECT
ST.EXP
M.SEL
UP
+
SETUP
RESET
SELECT
DOWN
-
TH.EXP
ATV
CUSTOM
DIRECT
ST.EXP
M.SEL
UP
+
SETUP
RESET
SELECT
DOWN
-
TH.EXP
ATV
CUSTOM
Summary of Contents for 3PJ Super
Page 1: ...R ...
