Home screen
Menu screen
Racing menu screen
Traction control
Traction control ON/OFF is indi-
cated on the home screen for a
few seconds.
It is displayed in the home screen.
When the traction control is ON.
Cycle speed
Duty ratio: X and Y ratio
Y:
(Throttle return time)
Throttle
return
Ser
vo tr
av
el
Trigger operation
Trigger point
X: (Throttle application time)
Traction control
95
Fu
nc
tio
n
Traction control
Traction control
Trigger operation with cornering on a slippery road surface is hard to get traction and
smooth cornering can not be done. By intermittently operating the operation of the throttle,
you can smoothly navigate and travel on topological lines. Also, with a drift car, by in-
termittently operating the motor in the high point direction, a pseudo reverberator engine
sound can be reproduced.
-During throttle operation, the throttle servo is intermittently operated in the forward
direction.
-You can set the amount of return to the slow side, the amount of delay, the speed of
pumping, the operating point, and the duty ratio of pumping.
-You can choose the action on the slow side near the neutral and the action on the high
point side.
Operation
- Mode : Function ON/OFF
Traction control function ON/OFF
setting. When using the Traction
control function, set to
"
ON
"
.
- Throttle return
Set the ratio at which the servo re-
turns to the slow side with respect
to the trigger operation. If set to 0%,
the traction control function will not
work. At 50%, it returns to the neu-
tral position at 50% (half), 100% of
the trigger operation amount.
1M23N32602_7PX_E.indb 95
2017/08/02 14:17:28
