Caution
Always insert and remove the microSD card in the state in
which the transmitter power is off.
If the microSD card is removed while being accessed (read or write), the
card itself and the data may be destroyed.
Do not install and remove the microSD card with the mi-
croSD card slot facing your face.
If you remove your fingers quickly, the microSD card may fly out and strike
your face and is dangerous.
Since the microSD card is a precision device, do not sub-
ject it to unreasonable force or shock.
(Commercial product)
SD standard and SDHC standard microSD cards
SD/SDHC format. Maximum size 32MB. SDXC format is not supported.
*The data in the memory card cannot be guaranteed regardless
of the contents and cause of trouble or damage. Always back-
up the valuable data in the memory card.
(Some models may not be operated by card.)
Caution
Always use R334SBS under the following conditions:
Battery
:Power requirement Rated voltage 3.8 to 7.4V (dry cell battery cannot be used)
Matched to the ratings of the receiver and connected servo.
• Transmitter’s receiver system > T-FHSS SR-SR mode channel (ON): SR mode for Futaba SR compatible servo.
• Transmitter’s receiver system > T-FHSS SR-SR mode channel (OFF): Normal mode for Futaba SR compatible servo.
: Futaba digital servo.
• Transmitter’s receiver system > T-FHSS/S-FHSS/FASST
Transmitter’s response type: Digital servo :Futaba digital servo
Transmitter’s response type: Analog servo :Futaba all servo (Normal mode for Futaba SR compatible servo.)
Under other conditions, the set will not operate, or the specified performance will not be displayed even if it operates. In ad-
dition, it may cause trouble with servos and other equipment. Futaba will not be responsible for damage, etc. caused by
combination with the products of other companies.
1RWH+RZHYHUGLJLWDOVHUYRVLQFOXGLQJ%/66HULHVEUXVKOHVVVHUYRFDQRQO\EHXVHGLQWKH
"
Digital servo type
"
.
Insert the card with the metal termi-
nals side at the bottom.
Remove the card by pushing it in and
then pulling it out.
Install and remove the card by push-
ing it in until you hear a click.
32
Bef
o
re U
s
in
g
Handling a microSD card (commercial product)
T7PXR model data and telemetry log data can be saved by using a commercial mi-
FUR6'FDUG:KHQ73;5VRIWZDUHXSGDWHVDUHUHOHDVHGWKHPLFUR6'FDUGFDQDOVREH
used to make the update.
:KHQDPLFUR6'FDUGLVLQVWDOOHGLQWKH73;5WUDQVPLWWHUD
folder called
"
Futaba
"
is created. Folders called
"
/2*
"
,
"
02'
-
(/
"
and
"
3,&785(
"
are created in this folder. The
"
02'
-
(/
"
folder stores the model data and the
"
/2*
"
folder stores
WKH WHOHPHWU\ ORJ GDWD :KHQ
"
Save screen
"
is set at the push
VZLWFKE\VZLWFKVHOHFWSDJHDQLPDJHRIWKHVFUHHQWREHGLVSOD\HGRQWKH73;5LVVDYHGE\
WKDWVZLWFK7KHVDYHGLPDJHLVVWRUHGLQDIROGHUFDOOHG
"
3,&785(
"
. Save the images used in the
"
Home Screen
"
IXQFWLRQSDJHLQWKLV
"
3,&785(
"
folder.
-The telemetry log data recorded on the microSD card can be converted to CSV format by the te-
OHPHWU\ORJFRQYHUWHUUHOHDVHGRQRXUKRPHSDJH:KHQFRS\LQJRUPRYLQJDORJ¿OHDOZD\VVHOHFW
both
"
)/,
"
and
"
)/'¿OH
"
.
Summary of Contents for 7PXR
Page 1: ...1 I INSTRUCTION NSTRUCTION M MANUAL ANUAL ...
Page 204: ...204 ...
