29
＜ Before Use ＞
Turn screw clockwise.
Stick tension maximum
Stick tension minimum
Turn screw counter-clockwise.
1.5mm hexagonal wrench
•Stick Tension (J2)
(Mode 2)
•Stick Tension (J1)
(Mode 1/2)
•Stick Tension (J4)
(Mode 1/2)
•Stick Tension (J3)
(Mode 1)
5. At the end of adjustment, re-install the side
cover and rear grips.
SD Card (secure digital memory card) (not included)
The T16SZ transmitter model data can be stored by using any commonly found SD card. When
T16SZ transmitter update software is released, the software is updated using an SD card. The T16SZ is
capable of using SD and SDHC cards (SD:32MB-2GB SDHC:4GB-32GB).
SD card reader/writer
Saving model data and update files (released
from Futaba) into the SD card, you can use those
files on your T16SZ transmitter. Equipment for
reading and writing SD cards is available at most
electronics stores.
Stored data
When you have a problem of saving or reading
data after a long period of use, please get a new SD
card.
*We are not responsible for, and offer no compensation for,
memory card data that fails or is damaged for any reason.
Be sure to keep a backup of all important data stored in your
SD card.
