66
● Tap the [Model select]
button in the Home
screen to call the setup
screen shown below.
＜ or ＞
Current model is
green.
Model select
The Model selection function performs model addition, call,
deletion, copy, and model name setting.
This function is used to load the settings of the
desired model into the T16IZ’s memory.
The settings may be selected from either the
transmitter’s built-in memory. Remember that up to
30 model memories are available in the transmitter.
The model data of the microSD card is for storage.
microSD card model data cannot be called directly
from the transmitter. The name of the model stored
in the transmitter and the microSD card may be
changed. This can be very useful to tell different
models settings apart. Each model name can be as
long as 15 characters, and the model name always
appears in the display screen.
The Copy function is used to copy one set of model
data into a second memory within the transmitter
and the microSD card. It may be used for getting
a head-start on setting up models with almost the
same settings (only differences need to be modified,
instead of entering the complete model from
scratch). Also, this function may be used to make a
backup copy of a model setup before any changes
are made.
● Select [Model select] at
the linkage menu and
call the setup screen
shown below.
Model addition
1. Tap the [New] button.
2. Tap [Yes] to add the model. (When you want
to cancel model addition, tap [No].)
*The added model is displayed in the model list.
*When a model is added, a receiver link is required.
● "Save to"
[Internal]: transmitter
memory
[SD card]: microSD card
●Return to Home or
Linkage menu
Summary of Contents for T16IZ
Page 1: ...1M23Z07702 WEB FULL MANUAL ...
Page 228: ......
