Multicross 5 Super Vision
47
EN
ACCURACY CONTROL
Monitor horizontal levelling
1.
Choose a room ±10 m long
2.
Place the instrument next to wall no. 1.
3.
Switch on the instrument and let it self-level.
4.
Mark the horizontal line in the middle of the cross on wall no 1.
5.
Turn the instrument through 180° and mark the laser beam in the middle of the
cross on wall no. 2.
6.
Move the instrument as close as possible to wall no. 2.
7.
Adjust the height of the laser so that the middle of the laser cross is on the wall
no. 2 marker.
8.
Then turn the instrument through 180° and note the diff erence between the
middle of the laser cross and the marker on wall no. 1.
9.
This diff erence should not exceed 2 mm.
10.
NB: The tolerance depends on the distance of the walls between which the
inspection has been carried out. This distance should be multiplied by 2.
Hence, if the instrument has an accuracy of 2 mm / 10 m, then in our example the
calculation is: 10 m distance x 2 = 20 m. Tolerance is 4 mm / 20 m.
Type:
Multicross 5 Super Vision
Art. No.:
030.05
Power:
6V / 540mA
www.laseto.be
Made in Taiwan
DO NOT STARE INTO THE
BEAM OR VIEW DIRECTLY
WITH OPTICAL INSTRUMENTS.
LASER RADIATION
CAUTION
CLASS 2M LASER PRODUCT
ACCORDING TO
IEC / EN60825-1: 2001
+-
AA
+-
AA
+-
AA
Use batteries of the same brand.
Insert 4x 1,5V Alkaline batteries. Type AA
Keep Dry
+-
AA
•
Max Output:
Multicross_5_Extreme_Vision_New.indd 47
29/01/14 09:53
Summary of Contents for 030.05
