MANUAL
150.40.M – QUATTRO MM [EN]
V1.0 – 05.2022 |
4
o
While the device is out of laser beam, hold the Accuracy/Arrow down button
[
17
]
for two
seconds, the on-grade level is reset to default.
o
If the device is switched off, the on-grade level is automatically reset to default.
o
If you want to save the user defined on-grade level permanently, you can choose this option
in the menu (see Menu Entries-OFS)
Use the menu
You can use the menu functions to edit settings. For most applications, the factory defaults are the best choice.
We recommend changing settings only in special applications.
•
Hold the Beeper /Enter button
[
16
]
for more than two seconds until the device beeping once and text
‘SEn’ displayed on Numeric digits/text display
[
19
]
, enter the menu functions.
•
Browse menu items by pressing the Accuracy/Arrow down button
[
17
]
or Grade LEDs /Arrow up
button
[
18
]
.
•
Select menu items by pressing the Beeper /Enter button
[
16
]
•
When the menu item is selected, you may browse item values by pressing the Accuracy/Arrow down
button
[
17
]
or Grade LEDs /Arrow up button
[
18
]
.
•
Select item value by pressing the Beeper /Enter button
[
16
]
•
Press he Power button ON/OFF
[
15
]
, exit the menu functions.
Menu Entries
‘Sen’ - Sensitivity: Hi(gh)/Low
Default:
High
. Set it to
Low
if you have problems with disturbing sources like
fluorescent or strobe lights.
•
‘AvG ‘- Averaging: Hi(gh) / Low
Default:
Low.
Set it to
High
if you need to have more stable
readings under difficult atmospheric conditions.
•
‘Unt ‘- Unit: mm / cm / in(ch) / f(ract). in(ch)
Default:
mm
. Choose desired numeric elevation display unit.
•
o.o.b - Out of beam display: On/OFF
Default:
OFF
. Switch Out-of-beam display on and off. For a
description see chapter LCD
Display.
•
‘OFS’
-
User-defined on-grade level: tmP(temporary) / PEr(manent)
Default: temporary.
To deactivate the function, choose
OFF
. To save the user-defined on-grade level
permanently, choose ‘
Per’
.
•
InF - Device Information
Find Information about Firmware Version (
Fw
), Device Code (
dc
) and Serial
Number (
Sn
) here.
Note:
All menu settings will be retained when the device is turned off
