Table of Contents
Warranty ............................................................. Inside Cover
General Description
.............................................................. 2
Installation ............................................................................ 3
Operation .............................................................................. 6
Specifications
..................................................................... 12
Version Chart
...................................................................... 13
12
Operation
Low Battery Display:
The left LED of the tilt display
will blink to indicate a low battery condition. The
tilt display will no longer operate. Replace or
recharge the batteries of the receiver.
Lost Communication Display:
The second above grade and
second below grade red LED's and the green on-grade LED of
the grade display will alternately blink indicating communication
between the receiver and the remote display has been
interrupted. Check all connections.
Lost Beam Display:
If the receiver moves vertically beyond the
laser signal for a short period of time, a sequence of LED's will
indicate which direction to move the blade or implement to pick
up the laser beam.
Specifications
Compatible Receivers
MCR1+, MCR2+, MCR3, MCR2E
(refer to the Software Version
Operation Chart on page 13)
Power Options
Receiver cable & receiver batteries
Machine battery cable, 10-30V
Machine power outlet cable, 12V
Battery Life
Alkaline ~ 40 Hours
(MCR LED's Off)
Ni-MH ~ 26 Hours
Operating Temperature
-4° F to 140° F (-20° C to 60° C)
Storage Temperature
-40° F to 158° F (-40° C to 70° C)
Size
4.5 x 2 x 1.1 inch (11.4 x 5.1 x 2.8 cm)
Table of Contents
Warranty ............................................................. Inside Cover
General Description
.............................................................. 2
Installation ............................................................................ 3
Operation .............................................................................. 6
Specifications
..................................................................... 12
Version Chart
...................................................................... 13
12
Operation
Low Battery Display:
The left LED of the tilt display
will blink to indicate a low battery condition. The
tilt display will no longer operate. Replace or
recharge the batteries of the receiver.
Lost Communication Display:
The second above grade and
second below grade red LED's and the green on-grade LED of
the grade display will alternately blink indicating communication
between the receiver and the remote display has been
interrupted. Check all connections.
Lost Beam Display:
If the receiver moves vertically beyond the
laser signal for a short period of time, a sequence of LED's will
indicate which direction to move the blade or implement to pick
up the laser beam.
Specifications
Compatible Receivers
MCR1+, MCR2+, MCR3, MCR2E
(refer to the Software Version
Operation Chart on page 13)
Power Options
Receiver cable & receiver batteries
Machine battery cable, 10-30V
Machine power outlet cable, 12V
Battery Life
Alkaline ~ 40 Hours
(MCR LED's Off)
Ni-MH ~ 26 Hours
Operating Temperature
-4° F to 140° F (-20° C to 60° C)
Storage Temperature
-40° F to 158° F (-40° C to 70° C)
Size
4.5 x 2 x 1.1 inch (11.4 x 5.1 x 2.8 cm)
