With the cooler lid open install this
assembly into the hull.
Connect the front steering arm onto
the bolt and secure the nut. Tighten
with a ¾” socket.
Insert steering handle into the hole
on the cooler lid with the handle fa-
cing the front of the boat. Pass the
bolt provided through the handle and
cooler lid.
Remove the bolt from the rudder.
With the arm tiller facing forward,
install the rudder pointing to the rear
of the boat. Align the holes, then re
-
place and tighten the bolt using a ¾”
wrench or socket. Test to ensure the
tiller and rudder turn together.
Assembly Instructions WB Series Only
Assembly Instructions WB Series Only
A5
A6
A7
A8
A9
A11
A10
A12
10
Summary of Contents for Equinox series
Page 22: ...22...
Page 23: ...Future Beach...
