850 REV04 REV DATE: 09/03/2014
Page
10
of
16
5.0 Disengaging the Prism Back
To Disengage the Back from the wheelchair:
1.
Push the release lever downwards on the left mounting plate until the ball
plunger engages the latch open position.
2.
Push the release lever on the right mounting plate.
3.
Lower mounting pins will automatically ejected from the mounting plates
(See Fig. 6 below)
4.
Once the lower pins are released, lift the back up and out of the upper slots
on the mounting plates.
Fig. 6
