6
CHAIR ADJUSTMENTS
730 REV 09 DATE REV: 09/02/14
50
POWER CHAIR: EXPLORER MAGELLAN
The vertical side canes can be set to widths of 16 to 24
inches in one-inch increments. This width
measurement is made between the outside surfaces of
the vertical tubes.
a.
To adjust the cane back width use a 7/16”
wrench to loosen the four nuts at the back of the
assembly.
b. Slide the side canes to the appropriate width
positions. Be sure to set the width symmetrically
about the center of the wheelchair.
c. When the overall width, measured from the
OUTSIDE of the vertical tubes, is at the desired
value, retighten the nuts.
Tools required: 7/16” wrench or socket
ii. Height
The push handles on the cane back are adjustable over
a 4” range. Measured from the top of the seat pan to
the top of the push handles, they may be set at 22”,
23”, 24” or 25”.
Figure 11
Summary of Contents for EXPLORER MAGELLAN
Page 1: ...730 REV09 REV DATE 09 02 2014 USER MANUAL...
Page 70: ......
Page 71: ......
Page 72: ......
