Montageanleitung FUXTEC elektrische Benzinpumpe FX-BP7l
Automatic Transfer Pump FUXTEC FX-BP7l
SAVE THESE INSTRUCTIONS.
READ ALL PRECAUTIONS AND INSTRUCTIONS
Spezifications
Specifications Delivery Volume : About 7 liter / Min.
Main Material : PE, PP, Acetal
Applicable Liquids: Gasoline Kerosene, Diesel.
Operation Instructions
1.
Insert two “D” size batteries (not included) as shown in the diagram.
2.
Immerse the suction end of the pump into the liquid.
3.
Insert the handle into a container to receive the liquid.
4.
Turn the switch to the on position. Do not over fill the container.
Avoid pumping
liquid to a container higher than the pump’s motor housing
5.
When finished, keep pump upright and lift the handle above the pump mechanism
to drain any liquid back into the original container. Do not lay pump down until all
liquid has been drained from the tube and pump.
6.
Run water through the pump after using it with any other liquid. This will rinse the
interior and extend the life of the pump.
Transferpump
Suction end
Battery case
