Montageanleitung FUXTEC elektrische Benzinpumpe FX-BP7l
Warning
●
Do not run dry.
●
Do not use thinner or solvents.
●
Do not use this pump for hot water.
●
Do not use this pump for transferring the following liquids: Aceton, Benzen,
Creosol, Ethyl, Phenol, Methyl ethyl, concentrated caustic soda liquid, Nictric
acid, Hydrochloric acid, Sulfuric acid, Etc.
●
Before pumping, turn heater off and allow to cool.
●
Do not turn the pump upside down after use.
●
Remove batteries when not in use.
Note
If any liquid backs up in the hose; there is a two-step safety overflow. Liquid will drain
from the bottom of the plastic “OVERFLOW” cap and form the air vents. Keep hands
away from these points. Do not use this pump near an open flame while pumping
gasoline.
FUXTEC GmbH, Kappstraße 69, 71083 Herrenberg, Germany
Kontakt:
info@fuxtec.de
oder www.fuxtec.de
