Original User Manual FUXTEC Petrol leaf blower FX-LB152P_de_en_fr_ita_rev01
31
24. Intended/non-intended use
The petrol leaf blower is designed exclusively for blowing leaves. Proper use also includes
reading and adhering to the operating instructions before each use. The device must be checked
for mechanical damage before and during use. If repairs are necessary, contact FUXTEC.
Only spare parts approved by FUXTEC or original spare parts may be used. The device may only
be put into operation in open garden area.
If non-approved or non-original spare parts are used, the operator and not the manufacturer is
liable for any damage to property or persons.
Any use other than that mentioned above is an unintended use:
•
Proper use also includes reading and adhering to the operating instructions.
•
If non-approved or non-original spare parts are used, the operator and not the manufacturer
is liable for any damage to property or persons.
•
Any use other than that mentioned above is an unintended use.
•
Intended use also includes compliance with the operating, maintenance and repair
conditions specified by the manufacturer and the safety instructions contained in the manual.
•
The applicable relevant accident prevention regulations as well as the other generally
accepted occupational health and safety rules must be observed.
•
Any use beyond this is considered improper use. The manufacturer is not liable for damages
of any kind resulting from this: the risk is borne solely by the user.
•
Own modifications to the device preclude any liability of the manufacturer for damages of any
kind resulting from such modifications.
•
The device may only be set up, used and maintained by persons who are familiar with it and
have been informed about the dangers. Repair work may only be carried out by the
manufacturer or by service centres recommended by the manufacturer.
•
The device must not be used in a potentially explosive environment or exposed to rain.
25. Residual risks and safe working
Even when used as intended, there may still be residual risks due to the design determined by the
intended use, despite compliance with all relevant safety regulations.
Residual risks can be minimized if the "Intended Use" and the "Safety Instructions" as well as the
operating instructions as a whole are observed.
•
Consideration and caution reduce the risk of personal injury and damage.
•
Injury due to disposal of parts.
•
Risk of carbon monoxide poisoning when used in closed or poorly ventilated rooms.
•
Danger of burns from hot components.
