CAPTIVA, old Civic, old CR-V, etc.
The pack of PKE-100 supplies OBD port connection or single wire
connection according to specific car.
Can high
Can high wire, normally works together with Can low wire (twisted
wire).
The pack of PKE-100 supplies OBD port connection or single wire
connection according to specific car.
Can low
Can low wire, normally works together with Can high wire (twisted
wire).
The pack of PKE-100 supplies OBD port connection or single wire
connection according to specific car.
Can GND/GND
Directly connect with metal ground.
Window-up 1
Negative output.
The output timer, sequence and other parameters are according to
specific cars, only 12v electric method installation has regular DIP
permutation to adjust them, see Chapters DIP Settings.
Trunk
Negative output.
Unlock
Negative output.
Window-up 2
Negative output.
The output timer, sequence and other parameters are according to
specific cars, only 12v electric method installation has regular DIP
permutation to adjust them, see Later chapters.
Window-up 3
Negative output.
The output timer, sequence and other parameters are according to
specific cars, only 12v electric method installation has regular DIP
permutation to adjust them, see Later chapters.
Steering lamp 2
Positive output; directly supply power to original steering lamp.
Maximum output current 7.5A.
Push Button Cable
ACC /Blue
For ACC signal background LED
ON /Orange
For ON signal background LED
Brake /Green
For Brake signal background LED
Press input -1
For press action signal input -1
Press input -2
For press action signal input -2
Assisted Cable
Door Lamp +
Positive input, normally do not connect it (see Door Trigger).
Door Lamp -
Negative input, normally do not connect it (see Door Trigger).
Fuel circuit
Positive input. For fuel detective and start output policy purpose.
For diesel vehicle with 12v electric installation method, this wire does
not exist or difficult to find, just give up it and change to connect ON
wire. After that, you can not start vehicle from ON status, must turn to
OFF then start again
Start Cable
IG1
To car original IG1 (ON1), black.
Normally does not break off when starting.
12V-1
To car original 12V-1 (B1), green.
IG2
To car original IG2 (ON2), blue.
Normally breaks off when starting.
11
