COMPONENTS & PARTS
SPINNERSHARK COMPONENTS LIST:
Deck
Steering
Bar
Brake
Lever
Foam
Hand
Grips
Knee
Pads
Flag
and
Pole
Flag
Holder
ASSEMBLY INSTRUCTIONS
1
2
3
4
5
7
6
2
Visit our website
www.fuzionscooter.com
for product support, replacement
parts & general help.
owner’s manual
3
owner’s manual
CONTENTS
BEFORE
YOU
START
page 1
COMPONENTS & PARTS
page 2
ASSEMBLY
INSTRUCTIONS
page 3
HOW
TO
RIDE
page 4
MAINTENANCE & BEFORE YOU RIDE
page 5
COMPANY & WARRANTY INFORMATION
page 6
Read and understand this entire manual before using this product.
DO NOT RETURN PRODUCT TO STORE!
we want to help you directly!
For assistance, contact warranty@nextsport.com
www.fuzionscooter.com
owner’s manual
1
BEFORE YOU START
1. The Fuzion SpinnerShark 4-Wheel Kneeboard is for riders 6 years and older.
2. Do not exceed 110 lbs (50 kg) total weight on the kneeboard.
3. Always wear proper protective equipment, such as a helmet, elbow, wrist, hand, and knee pads. Always keep the chinstrap
securely buckled on the helmet. Long sleeve shirt, long pants, shoes, and elbow and knee pads are strongly encouraged.
4. Always install safety fl ag before using. Parental supervision is required.
5. Use the kneeboard only on fl at, dry, level ground without loose debris like rocks or gravel. Keep shoelaces out of the
way of wheels or pivots.
6. Never use the kneeboard at dusk or night, or in wet or icy conditions. Wet weather impairs traction, braking, and visibility.
7. Avoid sharp bumps, drainage gates, and sudden surface changes. Avoid water, speed bumps, sand, gravel, and
anything else that could cause the wheels to suddenly stop. When in doubt, avoid bumps.
8. Do not wear anything that obstructs visibility or function when riding the kneeboard.
9. Watch out for pedestrians. Avoid excessive speed.
10. Never ride in traffi
c or on the street, and watch your surroundings for pedestrians, bikes, and skateboard and
kneeboard riders. Use the kneeboard in areas free from fi xed or moving hazards such as poles, curbs, hydrants, walls,
parked automobiles, and traffi
c.
11. Keep hands clear of below the deck steering mechanisms at all times.
12. Do not attempt to jump over objects.
13. Do not attempt to ride your kneeboard backwards.
14. Always avoid excess speed associated with downhill rides. Avoid steep inclines and do not ride too fast – you can lose
control and fall.
15. Always replace worn or broken parts immediately. Email us at warranty@nextsport.com.
AN IMPORTANT MESSAGE TO PARENTS
This manual contains important safety information. For your child’s safety, it is your responsibility to review this
information with your child and make sure that your child understands all warnings, cautions, instructions, and safety
topics. Nextsport recommends that you periodically review and reinforce the information in this manual with younger
riders, and that you inspect and maintain your child’s kneeboard to ensure their safety. Read the instructions carefully
and assemble the kneeboard according to these instructions before you allow the child to ride. This kneeboard requires
assembly by an adult.
A CAUTION ABOUT KNEEBOARD RIDING
You will see people on various videos and maybe even people you know doing tricks, stunts, and jumps. These are people
who have been practicing on kneeboards for an extended period of time. Build your skills gradually in order to minimize
risk and injury. Skateboard parts are not designed for kneeboards.
FAILURE TO USE COMMON SENSE AND HEED THE ABOVE WARNINGS FURTHER
INCREASES RISK OF SERIOUS INJURY. USE AT YOUR OWN RISK AND WITH
APPROPRIATE AND SERIOUS ATTENTION TO SAFE OPERATION. USE CAUTION.
owner’s manual
Cast PU Wheels and (2) 8mm nuts
Dual Wheel Brake
Wheel Axle Shaft
Nose Deck Assembly
Rear Deck Assembly
Steel Square Frame
Tools Included:
• Bolts
• Nuts
• Allen Wrenches
• Hex Wrench
8
11
11
8
9
12
12
9
10
13
13
10
2
3
4
4
5
5
7
6
1
1
Connect both tubes by inserting tube
from Nose Deck (Part 11) into tube
from Rear Deck (Part 12).
Start to bring both Deck Assemblies
together.
Push clips and grooved deck edge
together and make sure that all three
(3) clips are fully engaged and lock
into place.
Grooved edge of Rear Deck (Part 12)
is designed to fi t under the straight
edge of the Front Deck (Part 11).
Deck is designed for a tight fi t, so you
might want to use your thumbs to push
the Deck Assemblies into position.
Line up the bolt holes and then insert
bolts (2) thru the frame tubes.
Front Deck straight edge (Part 11)
fi ts over the Rear Deck (Part 12)
grooved edge.
Make sure that all three (3) clips line up.
Tighten the bolts and nuts (2) nuts
and bolts using the wrenches that are
included.
IMPORTANT READ BEFORE ASSEMBLING
HOW TO LINE UP & ASSEMBLE THE TWO DECK PIECES
• Assemble the deck by inserting the Nose Assembly (part # 11) square tubbing frame piece into the Rear
Assembly (part # 12) square tubing frame.
• You may need to press on the center of the deck to ensure that the entire length of the deck groove aligns
properly. Follow instructions below.
• Make sure to line up the two steel frame bolt holes. Plastic deck parts should fi t together easily by lining up
the grooved edges. When assembled, both deck surfaces should fi t together tight and fl ush.
1
4
7
2
5
8
3
6
9
