FVC Sprinter Side Ladder Installation Manual Download

Page: 8 / 8

FLATLINE VAN CO • SUPPORT@FLATLINEVANCO.COM • 888-667-5576

GET OUT AND EXPLORE!

LEAVE US A REVIEW

Happy with your new FVC product? We would love to hear (and see) from you! Head to the product page and click "Leave

Review." Add a short review and upload a few photos to be showcased on the product page.

SHARE YOUR PHOTOS WITH US

We love seeing how our customers use their FVC products and following along with your adventures. Tag us in your photos

with @flatlinevanco or send them to us via email. We love posting customer pictures in our feed!

CUSTOMER SUPPORT

If you are having any issues with your product, please reach out, and we will make it right. FVC is a company of van and

outdoor enthusiasts that design and use our own products, so we want you to be as stoked on your new parts as we are!

thanks!

@flatlinevanco

facebook.com/flatlinevanco

youtube.com/c/flatlinevanco

support@flatlinevanco.com

Summary of Contents for Sprinter Side Ladder

Page 1: ...PRODUCT IMAGE SP0201B Sprinter Side Ladder Installation Guide FLATLINE VAN CO SUPPORT FLATLINEVANCO COM 888 667 5576 ...

Page 4: ... TOP QTY MOUNT PLATE QTY 1 RAIL NUT QTY 2 1 4 20 FLANGE HEAD SCREW QTY 8 3 8 16 X 1 BUTTON HEAD SCREW QTY 2 3 8 SPLIT LOCK WASHER QTY 2 STICKER PACK QTY 1 INSTALLATION GUIDE QTY 1 3 8 16 X 75 BUTTON HEAD SCREW QTY 2 COUPLER QTY 2 3 8 FLAT WASHER QTY 2 1 4 SELF DRILLING SCREW QTY 5 3 8 16 NYLOCK QTY 2 ...

Page 5: ...ED 1 PLACE THE LADDER HALVES FRONT SIDE DOWN INSERT THE COUPLERS INTO ONE HALF SEE FIGURE 1 AND TIGHTEN DOWN USING THE 1 4 20 SCREWS 2 SLIDE THE OTHER LADDER HALF ONTO THE COUPLERS AND TIGHTEN DOWN NOTE IF DESIRED YOU CAN USE BLUE LOCTITE ON THE SCREWS 4 FIGURE 1 FIGURE 2 ...

Page 6: ...ACK THIS MAY BE TIME CONSUMING 4 NOW POSITION THE LADDER ON THE VAN HANGING IT ON THE ROOF RAIL LOOSELY SCREW THE TOP OF THE LADDER DOWN TO THE ROOF RAIL USING THE 3 8 16 X 75 SCREWS AND THE 3 8 SPLIT LOCK WASHERS JUST ENOUGH THAT IT IS SNUG SEE FIGURE 3 NOTE WE LIKE TO PLACE THE LADDER AS CLOSE TO THE REAR WHEEL WELL AS WE CAN SEE IMAGE BELOW 5 RAIL NUT FIGURE 3 ...