LANDSCAPE & ARCHITECTURAL LIGHTING
| Learn more. Visit fxl.com
INSTALL NOTE:
A-BR10
1. Assemble the install ring, install spacer, and
3/8" (10 mm) anchor bolts (included) to prepare
for installation in a concrete base. Be sure to
follow local codes and structural guidelines for
sizing of the concrete base.
2. Plumb conduit/cabling through the center of
the install ring.
Install ring
Install spacer
Anchor bolts
3. Ensure the ring and install spacer are flush with
the concrete surface.
Install spacer
Install ring
Wiring Chart (SV/UV – 60Hz)
Wiring Chart (HV – 50Hz)
Black
Line/Hot/Switching
White
Common
Green (via stud or
green lead)
Ground
Gray*
0-10V (-)
Purple*
0-10V (+)
FIX
TURE
FIX
TURE
BUILDING
BUILDING
*For use with 0-10V driver only
*For use with 0-10V driver only
Brown
Line/Hot/Switching
Blue
Common
Green/Yellow
Ground
Black*
0-10V (-)
Gray*
0-10V (+)
4. Carefully support the fixture while connecting
the wires. Be sure to use the appropriate wiring
chart and approved wire connectors.
3. Product Installation
