FXLuminaire A-BR10 Manual Download

Page: 3 / 4

LANDSCAPE & ARCHITECTURAL LIGHTING

| Learn more. Visit fxl.com

INSTALL NOTE:

A-BR10

3. Product Installation

5. Lift the fixture assembly and lower it onto the

mounting base assembly.

6. Align the four tabs with the grooves in the

install rings.

7. Hand-turn the main assembly clockwise 45°

until the main assembly locks in place.

8. Lock the main assembly in place by

tightening the 1/4" (6 mm) install rod at the
top of main assembly until it bottoms out on
the mounting base.

1/4" (6mm)
Install rod

1/4" (6 mm)
Install rod

Mounting base

9. Place the cap on top of the main assembly.

5/ 32" (4 mm)
Allen key

10. Hand-turn the cap clockwise until the tabs

engage and lock the cap in place.

11. Using a 5/32" Allen key, tighten the 10-32

setscrew at the underside of the light opening
to lock the top cap in place.

Summary of Contents for A-BR10

Page 1: ...t Never operate the fixture with a missing or damaged lens The lens must be cleaned on a regular basis Portions of the fixture may become extremely hot Do not touch the hot lens or fixture body Do not...

Page 2: ...chor bolts 3 Ensure the ring and install spacer are flush with the concrete surface Install spacer Install ring Wiring Chart SV UV 60Hz Wiring Chart HV 50Hz Black Line Hot Switching White Common Green...

Page 3: ...ain assembly locks in place 8 Lock the main assembly in place by tightening the 1 4 6 mm install rod at the top of main assembly until it bottoms out on the mounting base 1 4 6mm Install rod 1 4 6 mm...

Page 4: ...uct or part during the warranty period contact the local authorized manufacturer s representative Hunter s obligation to repair or replace its products as set forth above is the sole and exclusive war...