-
4
-
6
、
CONSOLE INSTRUCTION
(1) Display
1.1
"TIME" window
has two modes which shows the running time.
①
Forward counting time is from 0:00 to 99:59 minutes.
②
Countdown is count to 0 from the set time (setting range: 5:00~99:00 minutes). The
machine will stop slowly when it counts to 0:00 and shows "end", then the machine will
come to the standby mode after 5 seconds.
"CALORIES" window
has two modes which shows the calories.
①
Forward mode counts from 0 to 9999, it will recount when it reaches the top point.
②
Countdown mode will count from setting calorie data (setting ranges 20~990) to 0.
The machine will stop slowly when it counts to 0:00 and shows "end", then the machine
will
come to the standby mode after 5 seconds.
1.2
"SPEED" window
shows the current running speed, the setting range is
0.5MPH~7.5MPH. The speed will +/- 0.1MPH every time you click "+/-" button. P1 ~
P12 are displayed under the setting of automatic selection.
1.3
"DISTANCE" window
has two modes which shows the current movement distance.
①
in the forward counting mode, the distance will be increased from 0.0 to 99.9 miles, it will
recount if the distance reaches the top point.
②
in the distance countdown mode, the distance will be decreased from the setting data
(setting range 1.00~99.00 miles) to 0. The machine will stop slowly when it counts to 0:00
and shows "end", then the machine will come to the standby mode after 5 seconds.
"STEP" window
shows the steps. It counts from 0 to 9999 steps. It will recount when the
step numbers reach the top point.
Note:
The window will be switched from
TIME
and
STEP
cyclically, you can press "M"
button to switch between cyclic display mode and single display mode in motion state.
Note:
The window will be switched from
DISTANCE
and
CALORIES
cyclically, you
can press "M” button to switch between cyclic display mode and single display mode in
motion state.
