Door/window Sensor
C.
Installation
1.
PIR Sensor
Use screws to fix the device to a proper place
2.
Door/window Sensor
Use screws or sticker to fix the device's two parts on the door/window and frame
D.
Connection
1.
Download the G-Homa from APP store or Google Play on your smart phone, open the APP and
follow the procedure to register your account with a valid email address.
(You can also scan the QR code on the packaging to download G-Homa APP)
2.
Add new device to your smart phone by following the procedure demonstrated in the APP.
3.
Once connected, you can either control the Host via your smart phone or manually.
4.
Turn On the sensor Adding Mode via APP to add the sensors (PIR Sensor, Door/window Sensor,
etc.).
5.
Activate the sensor to complete the adding process. (PIR Sensor, by pressing the learning button or
make a movement before the sensor, the LED indicator will flash to show the signal is sent)
Detect angle: 100-110° Detect distance: 8-10m, Height: 1-3m
LED indicator:
Flashes when activated
or battery low
Speaker:
80dB (Distance: 0.3m)
Working mode button:
Choose from RF, OFF, RF+Tone mode
3xAG13 battery
Gap between two parts less than 1cm
