background image

18 

LIMITED WARRANTY 

 

The manufacturer guarantees to the purchaser of origin the remote starter and alarm to be free of defect material and labour.  However, if it is proven that the product is defective, 
inside the two year period as from the original date of purchase, the manufacturer will repair or replace, without expenses towards the purchaser, any part (excluding any expenses 
incurred to deliver the product to the manufacturer) remote starter or alarm which the manufacturer considers defective.  After the initial warranty period of 2 years, the manufacturer 
must repair or replace the defective products with a forwarding costs of 30.00$US.  All the guarantees apply to the original purchaser and ONLY to the vehicle in which it is initially 
installed.  Repairs or replacement of the defective modules must remain at the discretion of the manufacturer.  All the other parts, components, accessories or optional equipment 
relating to the remote starter and alarm are not included in the guarantee of the manufacturer.  This guarantee is nontransferable.  The original receipt must accompany a request 
for guarantee of service of any authorized retailer in factory.  The fact of not conforming to these conditions can result in cancellation of the guarantee.   
 
This guarantee does not cover the following elements:  expenses for labour of removal or reinstallation, transport charges, abuse, misuse or accidental damage of the remote 
starter and the alarm or parts of the latter.  This guarantee is cancelled in the event of amendments, repairs or deteriorations of any part of the product.  The manufacturer does not 
guarantee or does not insure against the loss of the vehicle or its contents.  The models of alarm are used only as dissuasion against any possible loss.  This alarm can be 
considered for a reduction of the insurances; premiums please contact your insurance agent for more details.  The manufacturer should not be held responsible for any consequent 
damage connected to a violation of this or any other guarantee express or implicit.  This guarantee gives you specific statutory duties.  These rights vary according to the area in 
which you reside.   
 
CERTAIN DAMAGE IS EXCLUDED.  The manufacturer declines any responsibility for additional damage caused by the product, including a financial loss, loss of use of the 
product, hiring of vehicle or all other expenses connected to the maintenance and the guard of the product.  The manufacturer declines any responsibility for any additional damage 
caused by the product or resulting from his use, including the expenses of repair or replacement of other goods damaged or caused by his use, even if the product functions 
correctly.  This product is designed to dissuade from an unauthorized use of the vehicles in which it is installed.  The manufacturer does not guarantee that the product is proof 
against loss and vandalism and the human error or an inadequate use.  The manufacturer does not accept any responsibility for any damage occurring any kind that it is caused by 
a vehicle in which the product is installed or resulting from damage from its use.  The manufacturer does not accept any responsibility for any damage resulting from the loss of the 
vehicle or its contents, caused or claimed caused, directly or indirectly, by a failure of the product.   
 

STARTER WITH MANUAL SHIFT – the installation of a remote starter MUST be carried out with an indicated manual transmission remote starter.  It is the sole 
responsibility of the operator of the vehicle to make sure that the vehicle is left with the transmission in neutral when the remote starter is used.  The manual 
transmission remote starter is designed as supplementary measure of safety ONLY!  The manufacturer does not guarantee or does not insure against any damage or 
loss of life, which can result from remote starting the remote starter when the vehicle is in gear.  The models for manual transmission are only designed to act as a 
preventive measure against starting in gear; it remains the sole responsibility of the operator or the owner of the vehicle to make sure the transmission is in neutral.   
 
 
 
 
 
 
 
 
 
 

Summary of Contents for P5000 series



















Reviews: