background image

FEATURES AND OPERATIONS

Note 1 : Enable / Disable Audible

When the audible option is enabled, the system will chirp each time the system is armed or disarmed by the remote. To enable this option, the 
following steps must be performed :

         1.  Disarm the system by pressing the unlock button          .
         2.  Turn the ignition key to ON position (engine is not running).
         3.  If 

disabled

, press once on the auxiliary button 

to 

enable

 this option 

(confirmation 1 chirp / 1 flash)

.  

If 

enabled, 

press once again on the auxiliary button          to 

disable

 this option 

(confirmation 2 flashes).

Note 2 : Panic Mode

The panic mode allows you to activate the horn or siren for a period of 30 seconds to scare away anyone prowling around your vehicle. In some 
instances, it may also be used as a car finder. To activate this option, the following steps must be performed :

         1.  The engine should not  be running.
         2.  Press 2 times (quickly) on the lock button          . You will hear the horn or siren be triggered.

To deactivate the panic mode, press on any button (will deactivate the panic mode and execute the button function).

Note 3 : Temporary Valet Mode

When the temporary valet mode is activated, the system will ignore the passive arming mode (see the definition of passive arming at page 6). It 
may be useful when you fill up some gaz or work on your vehicle and you don’t want the system arm by itself. To activate the temporary valet 
mode, the following steps must be performed:

         1.  Disarm the system by pressing on the unlock button          .
         2.  Press 2 times (quickly) on the unlock button          . The parking lights will flash 5 times to confirm the entry to this mode. 

By pressing on lock          or unlock          button, you will cancel this function.

3

AUX

AUX

Summary of Contents for POWERStart P8U-FM











Reviews: